TELESCOPI> MICROSCOPI CANNOCCHIALI E BINOCOLI CANNOCCHIALI OUTDOOR ASTROFOTOGRAFIA SOLARE USATO

Home Page

AVALON LINEAR VERSIONE STARGO BLUETHOOTH O WIFI, MONTATURA EQUATORIALE, AVALON INSTRUMENTS
AVALON LINEAR VERSIONE STARGO BLUETHOOTH O WIFI, MONTATURA EQUATORIALE, AVALON INSTRUMENTS
Avalon LINEAR: Montatura Equatoriale, tecnologia Fast-Reverse, completa di: Goto STARGO Bluethooth, Dove-tail 3 (peso 13 Kg), Cann. polare, barra e contrappeso inox 6 Kg, Alimentatore 220v 12-24 / 4 Ah Avalon LINEAR: Montatura Equatoriale, tecnologia Fast-Reverse, completa di: Goto STARGO Bluethooth, Dove-tail 3 (peso 13 Kg), Cann. polare, barra e contrappeso inox 6 Kg, Alimentatore 220v 12-24 / 4 Ah Avalon LINEAR: Montatura Equatoriale, tecnologia Fast-Reverse, completa di: Goto STARGO Bluethooth, Dove-tail 3 (peso 13 Kg), Cann. polare, barra e contrappeso inox 6 Kg, Alimentatore 220v 12-24 / 4 Ah Avalon LINEAR: Montatura Equatoriale, tecnologia Fast-Reverse, completa di: Goto STARGO Bluethooth, Dove-tail 3 (peso 13 Kg), Cann. polare, barra e contrappeso inox 6 Kg, Alimentatore 220v 12-24 / 4 Ah
Avalon Instruments - AVLIN0STGO
Avalon LINEAR: Montatura Equatoriale, tecnologia Fast-Reverse, completa di: Goto STARGO Bluethooth, Dove-tail 3 (peso 13 Kg), Cann. polare, barra e contrappeso inox 6 Kg, Alimentatore 220v 12-24 / 4 Ah
Avalon LINEAR, German Equatorial Mount, Fast-Reverse Technology, StarGO BLUETHOOTH Version, Dovetail 3" clamp, Polar Finder, 6 Kg. inox counterweight and shaft, Handle, Power Supply 15V/4 A.
EUR       4.730,00 scarica la scheda in PDF disponibile
EUR 3.877,05 + local tax VAT 22%. Only for EU customer    
Others also bought the following products
  Avalon Metal tripod T-POD 130 (T-130) - Highest q... Adapter for Polarmaster on Avalon Linear Mounts... Avalon inox machined counterweight Kg.4, Bore 30mm... Extender for Avalon T-POD. Height 20cm / 8" for LI...  

Bookmark and Share
 con rate a partire da € 145/mese
 Acquista a rate per un ordine di almeno EUR 600 ! (only for Italy)
TAX FREE for not EU customer
Pagamenti con le principali carte di credito su circuito PayPal
VISA AMEX MASTERCARD POSTEPAY AURA PAYPAL
Bonifico Contrassegno Rateizzazioni not EU customer
La LineAR Fast Reverse è una montatura innovativa che realizza i movimenti di ascensione retta e di declinazione mediante pulegge e cinghie dentate sostituendole quindi alle classiche corone e viti senzafine. Questa soluzione permette di ottenere un movimento regolare, senza
gioco (quindi assenza di backlash) e soprattutto senza picchi improvvisi. Queste sono caratteristiche importantissime per ottenere i migliori risultati durante le lunghe pose fotograficheo per l’osservazione visuale ad alti ingrandimenti. Dalla possibilità di rapida inversione del moto, senza pause, possibile con l’uso delle cinghie dentate e pulegge, specialmente per l’asse di declinazione, deriva il nome di Fast Reverse. Le cinghie dentate utilizzate hanno la struttura in mescola speciale e trefoli in acciaio per evitare deformazioni, allungamenti e stress. E’ importante comprendere che nel sistema puleggia/cinghia dentata, non c’è contatto diretto tra le pulegge ed il moto viene trasmesso tramite la cinghia che impegna dal 50% al 90% della circonferenza delle pulegge e quindi qualunque errore viene “mediato” da tutti gli altri denti, peraltro “morbidi”, della cinghia già impegnati nella puleggia, riducendo notevolmente l’impatto sull’errore di tracking. Al contrario, nei sistemi corona-vite senza fine, la trasmissione del moto avviene per contatto in un unico punto e pertanto qualunque errore dell’una o dell’altra è destinato a manifestarsi prima o poi per intero come errore di tracking. Dal momento che nella montatura non ci sono ingranaggi, non c’é alcuna necessità di effettuare lubrificazioni periodiche e pertanto la manutenzione è estremamente ridotta e limitata alla semplice
pulizia esterna. La figura a destra mostra gli elementi principali della montatura. Il frontalino dello StarGO è posto sulla faccia opposta della montatura. Il treppiede mostrato in figura non fa parte della fornitura. Si consiglia di usare il treppiede Avalon T-pod offerto come opzione.

X-SOLVER - Puntamento fino a 24 stelle per un modello efficace.

Dopo la versione 5.1.42, la suite software StarGO include X-Solver, un`applicazione basata sul cosiddetto Plate Solving. Con X-Solver è possibile costruire un modello di cielo e di utilizzarlo in seguito durante le altre sessioni osservative. L`applicazione X-Solver viene fornita con due tool molto utili: Lo “Sky Model” e il “Polar Alignment”. Lo Sky Model consente a un utente di costruire un modello di cielo con un massimo di 24 stelle. Lo strumento fornisce un`interfaccia grafica intuitiva che mostra una rappresentazione 2D del cielo. Con questa applicazione l`utente può progettare un modello personalizzato selezionando le posizioni dei punti nel cielo facendo doppio clic con il mouse. In alternativa, un utente può selezionare il modello predefinito disponibile sul lato destro del pannello dello Sky Model (cioè il modello 8 + 8). La funzione di modellazione è particolarmente utile in installazioni di osservatori fissi tuttavia, per la velocità della sua esecuzione, può essere utilizzata anche per l`installazione mobile per l`osservazione visiva o l`astrofotografia. Il tool Polar Align permette una esecuzione dell’allineamento polare facile e veloce usando la funzione di plate solving.

X-SOLVER: Allineamento polare

X-Solver è provvisto di uno strumento che permette di effettuare un veloce allineamento polare utilizzando la funzione di plate solving.
Linear Fast Reverse
Is an innovative telescope mount designed for astronomical imaging and manufactured in Italy by the Dal Sasso Srl, a company with more than 30 years of experience in the field of high precision mechanics.

Marketed with the Avalon Instruments trademark, this mount ranks in the medium-size mount range with a weight capacity around 20-25 kg (44 – 55 lb), imaging and observing, respectively.

The Liner Fast Reverse project rises from the passion for astronomy and mechanics taking advantage of more than 20 years of experience and testing, lots of star parties and spending countless hours under starry skies, with any types of instrumentation. Since the great majority of the problems regards the mount, both design and manufacture have been focused on realizing a mount such to overcome technical troubles. Let’s start with the mount, which we consider the main innovation, by explaining the reasons why we chose to switch from the traditional worms and gears mechanism to a new transmission system based on pulleys and tooth belts, for both right ascension and declination.

Pulleys and toothed belts, zero backlash!
This choice has allowed to obtain several advantages: a really steady motion without play (no backlash) and sudden peaks, factors of paramount relevance for long guided exposures and during high magnification visual observations. These features are of particular relevance especially for the declination axis motor that can now quickly reverse the motion without breaks to recover the plays: from here the mount name FAST REVERSE. The toothed belts used in the M-uno have the structure made of special material with steel strands to avoid any deformation, elongation and stress, much better than those used in the automotive engine distribution system (which are generally made of rubber with nylon strands). Considering that the service time for the automotive toothed belts is around 100.000 km (60.000 miles), assuming a medium regime of 2.000 rpm and thermal stress from 0 to 90°C (30 to 195 F) in a few minutes, we can think that the life cycle of the Linear toothed belts will be extremely long!
It is important to underline that in the gear-worm systems the motion transmission has only one tangent point of contact, any errors on each of the two components will, sooner or later, result into a tracking errors.
On the other hand, in the pulley-toothed belt system, no direct contact occurs between the pulley and the motion is transmitted by the belt engaging from 50% to 90% of the girth surface. Consequently any error, eventually present, is averaged among the cogs, moreover soft, greatly reducing the tracking error.
These features allow the Linear mount to perform guided exposures up to 20-30 minutes with punctiform stars even with optics of 2-3 meters of focal lenght.

No wear, no frictions!
No wearing effects since no relevant frictions occur. In fact, all the pulleys and the axes rotate on roller bearings, 13 for the RA axis and 13 for the DEC axis that allow to reduce the total friction almost to zero.
Another significant advantage of very low frictions is that the risks of motor slipping during GOTO operation is virtually null.
On the contrary, it is well known the difficulty to regulate the coupling between gear and worm in the conventional mounts. If the coupling is tight the motors can stuck with consequent loss of the position, if the coupling is too loose the plays increase.
On the other hands, the absence of significant play in the M-uno makes the initial calibration of guiding CCD quick and easy.

No lubrifications, no maintenance!
Since there are no gears, there is no need of periodical lubrication of the internal components and therefore the maintenance is extremely reduced and limited to the esternal cleaning.

Concluding remarks

The Linear mount is specifically designed for mobile astroimagers, with some peculiar features:

Excellent performances in guided imaging, even with high focal lengths, up to 3 metres
Simple and original design
Really portable and lightweight, with its useful handle and a weight of only 12.5 kg (27,5 lb) , without counterweight and bar
Payload capacity up to 20 kg (44 lb) in imaging (best choice 15/18 kg , 33/40 lb)High quality manufacturing, all parts are being designed for long lasting use, made of anodized aluminium and stainless steel, directly milling obtained from single blocks thanks to high precision 5 axes CNC machines.
Reliable and performing
Easy to use, in both mechanical solutions and as far as the pointing procedure is of concern. For this latter, in fact, the SYNSCAN by Skywatcher has been adopted, one of the most used and reliable in the world, having one of the lowest cost-to-performance ratios, that can be easily and freely updated on the Internet.
Chinese mounts apart, the LINEAR is the cheapest mount, among those with the same capacity in the whole world.
Easily suitable to the main commercial tripods, such as Baader AHT, Skywatcher and several others

In short, the Linear Fast Reverse mount is ideal for those travelling astroimagers seeking for long deep sky exposures, even with long focal lengths, by means of an high quality, light, reliable, accurate and easy-use setup, with an excellent quality/performance-to-cost ratio.

 

Caratteristiche Tecniche / Specifications

General LINEAR MOUNT - TECHNICAL DATA 

Type Single arm equatorial mount
Head Weight 12 kg (26,4 lb) , without counterweight and bar
Capacity 20 kg (44 lb ) in imaging, 25 kg ( 55 lb) in observing
Transmission four-step reducer via pulley-tooth belt system on ball bearing, with no plays on the axes
Tracking error +/- 5-7 arc seconds, in average
Construction Material Anodized aluminium, worked out from single blocks with high precision CNC machines 
Motion system   Pulleys made with special glass fiber polymer and high precision tooth belts
AR Axes Heavy duty steel, diam. 35mm; 2 conical roller bearings, diam. 62mm + 1 roller bearing diam. 72mm + 2 roller bearing diam. 45mm – On bearings clutch system
DEC Axes Heavy duty steel, diam. 35mm; 2 conical roller bearings, diam. 62mm + 1 roller bearing diam. 72mm + 1 roller bearing diam. 45mm – On bearings clutch system
Polar Finder Skywatcher model (optionally Losmandy model)
GOTO system Avalon StarGo Bluethooth
Counterweight bar Quick release, 30mm diam.( 1,181 "), stainless steel bar
Counterweight   One adjustable, stainless steel counterweight
Scope plate Losmandy, 3" (75mm), dovetail, single knob with 2 tightening points
Warranty 2 years from the purchase date, extended to 5 years for the transmission system

General STARGO CONTROL - TECHNICAL DATA 

Computerized control system: based on stepper motor technology and dual communications (USB and Bluetooth or Wi-Fi).

Operational Mode: Equatorial or Azimuth (for the appropriate mounts)

Pointing Model:
  • Single star
  • Three star (only in Alt Az axis mode)
  • Up to 24 stars
System Speeds:
  • “Guide”: From 0,05 to 0,95X in 0,05X increments.
  • “Center”: From 2 to 10X
  • “Find”: From 10 to 150X.
  • “Slew”: N. 4 speeds ranges (Low, Medium, Fast, Ultra) depending on the mount “gear ratio” and, for the maximum speed “Ultra”, on the power supply (requires at least 15 VDC).
Tracking Speeds:
  • Sidereal
  • Solar
  • Lunar
  • Terrestrial (No tracking)
RA – DEC Motor Currents: Typical currents are 0.3 A for tracking and 1.5 A (adjustable) for slewing.

Data Base: 14000 Default objects. The database is easily editable by the user using a simple text editor. This database is part of the StarGO software and it may be accessed using a PC.

Input/Output Ports:
  • USB
  • Bluetooth or WiFi
  • ST4
Output Ports:
  • AUX0: (Baader Steeldrive only in Bluetooth version)
  • AUX1: Hybrid Step Motor with a max current of 1 A.
  • AUX2: Hybrid Step Motor with a max current of 1 A.
Electrical Characteristics:
  • Power Supply: 12 – 18 VDC stabilized
  • Current: from 0.3 to 1.5 A (adjustable) in all operating conditions
Control Operations:
  • Goto and Sync to celestial objects
  • Automatic Meridian Flip
  • User definable parking and homing functions
  • Programmable Custom Gear Ratio.
User updatable firmware:  USB connection

Operating Temperature Range: -20 ≈ +40 °C

 
UNITRONITALIA Instruments S.r.l. Via G.B.Gandino, 37/39/41 - 00167 ROMA - Italy - Tel. 06 39738149 - Fax. 06 39760014 - email: contact@unitronitalia.com
Orario ufficio da Martedi a Sabato: 10:00-13:00 / 14:30-19:30 Orario apertura al pubblico da Martedi a Venerdi 14:30 / 19:30 Sabato 10:00-13:00 / 14:30-19:30 email: shop@unitronitalia.com
RI ROMA/2010 C.S. 60000 i.v. - VAT/P.IVA IT 10878271005 REA 1261155
E' vietato copiare immagini e contenuti dei testi senza il consenso scritto della UnitronItalia Instruments Srl.

 

 

 

 

 

 

 

 

 

 

WCO: web design, Graphic design, SEO, soluzioni SW